# 16-Channel USB3.2 Logic Analyzer

**URL:** <https://community.frame.work/t/16-channel-usb3-2-logic-analyzer/29727>\
**Category:** Expansion Card\
**Created:** [April 20, 2023, 10:59pm UTC](https://community.frame.work/t/16-channel-usb3-2-logic-analyzer/29727 "2023-04-20T22:59:01Z")\
**Posts on this page:** 1\
**Showing post:** 26

<div class="post-metadata">

**Author:** ![Clover3077](https://sea1.discourse-cdn.com/flex001/user_avatar/community.frame.work/clover3077/32/15373_2.png) [@Clover3077](https://community.frame.work/u/Clover3077)\
**Post date:** [May 19, 2023, 6:36pm UTC](https://community.frame.work/t/16-channel-usb3-2-logic-analyzer/29727/26 "2023-05-19T18:36:40Z")

</div>

> [@Jack\_LeFevre](#):
>
> However, the performance is severely handicapped by the slow USB 1.1 interface.

Hi there,  
I am working on the [rp2040 expansion card project](http://community.frame.work/t/rp2040-expansion-card/20144/) and thought of this.

after checking rp2040 documentation, I confirmed that rp2040 does have support for USB2.0 (12Mbps) just that it is not “PHY” (I still don’t understand this term, btw) and it can be done on a GPIO using the Programmable IO (PIO) controllers. [example](https://www.cnx-software.com/2022/02/16/raspberry-pi-rp2040-gains-an-extra-usb-port-through-pio/)

I am interested to something like this since I plan to run the rp2040 as a pure GPIO controller and handle all protocols & applications on the framework, effectively offloading any computation from the mcu. I am currently working on a cpp+arduino version but certainly interested in remaking it in cpp+PIO assembly for best performance.

This would therotically provide ~750KSa/S on 16 pins and 6MSa/S (I doubt if this is possible as rp2040 runs 16MHz stock, so at that speed every cycle matters) on 2 pins which is more than enough for me who are really only using a logic analyzer for stuff like I2C.

\*As a disclaimer, I am not undermining your project but rather trying to add a low cost alternative to it.

---

_[View the full topic](https://community.frame.work/t/16-channel-usb3-2-logic-analyzer/29727)._
