# Cooler Master case fit issue

**URL:** <https://community.frame.work/t/cooler-master-case-fit-issue/41582>\
**Category:** Community Support\
**Tags:** hardware\
**Created:** [December 7, 2023, 3:33am UTC](https://community.frame.work/t/cooler-master-case-fit-issue/41582 "2023-12-07T03:33:47Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![MJ1](https://sea1.discourse-cdn.com/flex001/user_avatar/community.frame.work/mj1/32/15519_2.png) [@MJ1](https://community.frame.work/u/MJ1)\
**Post date:** [December 7, 2023, 3:59am UTC](https://community.frame.work/t/cooler-master-case-fit-issue/41582/2 "2023-12-07T03:59:32Z")

</div>

Welcome to the forum.  
Perhaps pictures?

I’ve seen someone else have trouble with the case. Though that was an AMD board

> [@AMD board solely in the coolermaster case?](http://community.frame.work/t/amd-board-solely-in-the-coolermaster-case/38608/17):
>
> Unfortunately the original 4h30m stream didn’t save, which I was counting on. It showed all the unboxing and the trial and error. Here is a new stream where I recap the issues: The Case This is the orientation, which is the correct and only possible orientation: See framework’s own photo: I was unable to get the case’s lid to close with the framework board in, the top right corner was sticking out. The power button was pressing against the board. Upon inspection, th…

---

_[View the full topic](https://community.frame.work/t/cooler-master-case-fit-issue/41582)._