# Debian 13.1 Trixie on Framework 13 (Intel)

**URL:** <https://community.frame.work/t/debian-13-1-trixie-on-framework-13-intel/75083>\
**Category:** Linux\
**Tags:** debian\
**Created:** [September 9, 2025, 10:58pm UTC](https://community.frame.work/t/debian-13-1-trixie-on-framework-13-intel/75083 "2025-09-09T22:58:49Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jason\_Neumann](https://avatars.discourse-cdn.com/v4/letter/j/97f17d/32.png) [@Jason\_Neumann](https://community.frame.work/u/Jason_Neumann)\
**Post date:** [September 9, 2025, 10:58pm UTC](https://community.frame.work/t/debian-13-1-trixie-on-framework-13-intel/75083/1 "2025-09-09T22:58:50Z")

</div>

I’ve been running Debain 12 (Bookworm) for 2 years with no issues. I just tried a clean install of Debian 13 (Trixie), and it appears that all the hardware is supported, and generally runs well right up to the point the CPU stalls with the fallowing error found in _dmesg_ output.

```auto
rcu: INFO rcu_preempt self-detected stall on CPU

```

At that point I have hard reset the laptop, so I’ve gone back to Debian 12 for the time being. If anyone finds a solution/workaround, please let me know.

Thanks!

---

<div class="post-metadata">

**Author:** ![Kenny\_Lewis](https://avatars.discourse-cdn.com/v4/letter/k/c0e974/32.png) [@Kenny\_Lewis](https://community.frame.work/u/Kenny_Lewis)\
**Post date:** [September 10, 2025, 12:54pm UTC](https://community.frame.work/t/debian-13-1-trixie-on-framework-13-intel/75083/2 "2025-09-10T12:54:21Z")

</div>

I don’t have a fix for you, I’ve been running Debian 13 Trixie since I got my Framework 13 AMD in January 2024. I kinda expect it would Just Work, but that’s a vague error message for a rare thing to fail.

Note that Trixie brought changes that include splitting up the firmware-graphics into firmware-graphics-intel, firmware-graphics-amd and firmware-graphics-nvidia which you will need from the `nonfree` repository. Make sure you’ve got all the `firmware-linux{,-free,-nonfree}` packages installed, too.

K3n.

---

<div class="post-metadata">

**Author:** ![Jason\_Neumann](https://avatars.discourse-cdn.com/v4/letter/j/97f17d/32.png) [@Jason\_Neumann](https://community.frame.work/u/Jason_Neumann)\
**Post date:** [September 10, 2025, 2:43pm UTC](https://community.frame.work/t/debian-13-1-trixie-on-framework-13-intel/75083/3 "2025-09-10T14:43:46Z")

</div>

Thanks K3n,

I’ll give it a try again this weekend. I now have spare nvme drive, so I won’t have to blow away functioning Bookworm installation, ‘til after I figure this all out.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex001/uploads/framework3/original/1X/64c81a89f963ddb07633887baceb642a4b056046.png) [@system](https://community.frame.work/u/system)\
**Post date:** [March 9, 2026, 2:43pm UTC](https://community.frame.work/t/debian-13-1-trixie-on-framework-13-intel/75083/4 "2026-03-09T14:43:47Z")

</div>

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.