# Dongle Hider **URL:** \ **Category:** Expansion Card\ **Created:** [July 29, 2021, 3:56pm UTC](https://community.frame.work/t/dongle-hider/3573 "2021-07-29T15:56:29Z")\ **Posts on this page:** 1\ **Showing post:** 14
**Author:** ![Greg\_Smith1](https://sea1.discourse-cdn.com/flex001/user_avatar/community.frame.work/greg_smith1/32/6348_2.png) [@Greg\_Smith1](https://community.frame.work/u/Greg_Smith1)\ **Post date:** [January 27, 2022, 5:24pm UTC](https://community.frame.work/t/dongle-hider/3573/14 "2022-01-27T17:24:48Z")
I used the STL file from @Avendor and the USB-C to USB-A adapters (different Amazon link) was able to use it for my own Logitech Unifying Receiver. A few notes on that. I used the “micro” version of the Unify Receiver as the standard or older model did not clear the backstop built into the model @Avendor posted… at least not without taking the plastic off the end. I was able to use the standard micro receiver and just sand the plastic flush with the metal for a decent fit. I added a very small bit of rubber between the receiver and the backstop and it works perfect. Here is the Amazon link for the in-stock converter: > **[Amazon.com: chenyang 5 PCS USB C OTG Adapter USB C Male to USB 2.0 Female Ultra...](https://www.amazon.com/Chenyang-Ultra-Type-C-Adapter-Tablet/dp/B078N1TWG8)** > > Ultra Mini Type-C USB-C to USB 2.0 OTG Adapter for Cell Phone Tablet & USB Cable & Flash Disk Data transfer rating 480Mbps max. This OTG Adapter is compatible with most android phones with Type-C port. Make sure your phone support OTG function. ... ![PXL_20220127_170506895](https://us1.discourse-cdn.com/flex001/uploads/framework3/original/2X/e/e94febf8e04c58a69111d16c66107dd18402c84d.jpeg) ![PXL_20220127_170535463](https://us1.discourse-cdn.com/flex001/uploads/framework3/original/2X/c/c07a4ed76ead80d22bf881228cca9d940b8a8ed9.jpeg) --- _[View the full topic](https://community.frame.work/t/dongle-hider/3573)._