# Feature Request Megathread **URL:** \ **Category:** Framework Laptop 13\ **Tags:** feature-requests\ **Created:** [July 28, 2021, 9:02pm UTC](https://community.frame.work/t/feature-request-megathread/3489 "2021-07-28T21:02:22Z")\ **Posts on this page:** 1\ **Showing post:** 156
**Author:** ![lhl](https://sea1.discourse-cdn.com/flex001/user_avatar/community.frame.work/lhl/32/9497_2.png) [@lhl](https://community.frame.work/u/lhl)\ **Post date:** [August 16, 2022, 1:38am UTC](https://community.frame.work/t/feature-request-megathread/3489/156 "2022-08-16T01:38:29Z")
> [@Jieren\_Zheng](#): > > Would be great if we can configure the fan curve profiles in the BIOS too. In Linux, thanks to [ectool](https://www.howett.net/posts/2021-12-framework-ec/), you can actually do better and control the fan curves without going into the BIOS: > [@\[RESPONDED\] Changing the fan temperture points with ectool](http://community.frame.work/t/changing-the-fan-temperture-points-with-ectool/17355): > > After listen to annoying fan noises for way too long I figured that I could dig into the framework EmbeddedController source code to see if it could be fixed. Well, I found that the temperature points for the fan can be adjusted! And that’s all I wanted. WARNING: running your laptop at higher temperatures might shorten its lifetime. This might not be covered by warranty. Misconfiguring a “halt” temperature could result in a long recovery session. Prerequisite Get a ectool version with frame.… There’s also a neat little daemon which lets you do more advanced fan control strategies: > [@\[Linux\] Fan speed controller with custom speed curve](http://community.frame.work/t/linux-fan-speed-controller-with-custom-speed-curve/17208): > > I was a bit annoyed by the noise of my FrameWork laptop’s fan, which was spinning way too fast for my taste, so I’ve written a little script to fix that over the weekend. You can find it here: [GitHub - TamtamHero/fw-fanctrl](https://github.com/TamtamHero/fw-fanctrl) There’s a bash script to install it as a service / uninstall it. I’ve only tested it on Ubuntu 20.04 but I think it should work on other distributions as well. Feel free to improve it and push PRs, the script is very small (~100 lines of Python) and can be perfected/ made … --- _[View the full topic](https://community.frame.work/t/feature-request-megathread/3489)._