Looks like you have some problems to run it in the first place, maybe some modules are missing in your installation. Unfortunatly, I am a Windows guy and cannot help very much. It would be nice if you get this sorted.
I am interested in the following commands working:
ryzenadj.exe -i
Output in 3.05 (some values may differ):
CPU Family: Phoenix Point
SMU BIOS Interface Version: 14
Version: v0.15.0
PM Table Version: 4c0008
| Name | Value | Parameter |
|---------------------|-----------|--------------------|
| STAPM LIMIT | 53.000 | stapm-limit |
| STAPM VALUE | 7.125 | |
| PPT LIMIT FAST | 53.000 | fast-limit |
| PPT VALUE FAST | 14.235 | |
| PPT LIMIT SLOW | 43.000 | slow-limit |
| PPT VALUE SLOW | 7.242 | |
| StapmTimeConst | 36.857 | stapm-time |
| SlowPPTTimeConst | 90.756 | slow-time |
| PPT LIMIT APU | 41.000 | apu-slow-limit |
| PPT VALUE APU | nan | |
| TDC LIMIT VDD | 54.000 | vrm-current |
| TDC VALUE VDD | 4.984 | |
| TDC LIMIT SOC | 16.000 | vrmsoc-current |
| TDC VALUE SOC | 2.041 | |
| EDC LIMIT VDD | 105.000 | vrmmax-current |
| EDC VALUE VDD | 55.073 | |
| EDC LIMIT SOC | 23.000 | vrmsocmax-current |
| EDC VALUE SOC | 3.955 | |
| THM LIMIT CORE | 100.000 | tctl-temp |
| THM VALUE CORE | 46.792 | |
| STT LIMIT APU | 60.000 | apu-skin-temp |
| STT VALUE APU | 36.689 | |
| STT LIMIT dGPU | 0.000 | dgpu-skin-temp |
| STT VALUE dGPU | 0.000 | |
| CCLK Boost SETPOINT | nan | power-saving / |
| CCLK BUSY VALUE | nan | max-performance |
Set stapm_limit:
ryzenadj.exe -a 43000
Sucessfully set stapm_limit to 43000
Set slow limit:
ryzenadj.exe -c 43000
Sucessfully set slow_limit to 43000
Set apu skin temp:
ryzenadj.exe --apu-skin-temp 43000
Sucessfully set apu_skin_temp_limit to 43000