# Framework Vesa Accessory Case

**URL:** <https://community.frame.work/t/framework-vesa-accessory-case/18117>\
**Category:** Mainboard\
**Created:** [May 2, 2022, 9:38pm UTC](https://community.frame.work/t/framework-vesa-accessory-case/18117 "2022-05-02T21:38:23Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![whatthefilament](https://sea1.discourse-cdn.com/flex001/user_avatar/community.frame.work/whatthefilament/32/8508_2.png) [@whatthefilament](https://community.frame.work/u/whatthefilament)\
**Post date:** [May 2, 2022, 9:38pm UTC](https://community.frame.work/t/framework-vesa-accessory-case/18117/1 "2022-05-02T21:38:23Z")

</div>

[https://www.printables.com/model/190779-framework-vesa-accessory-case](https://www.printables.com/model/190779-framework-vesa-accessory-case)

This mod takes the standard case/VESA mount provided by Framework and adds a few features

- Splits up the VESA mount for easier printing.
- Add’s Extensions to the VESA mount to provide more airflow behind the case
- Added two 3/8 inch mounting points with extension rods that have a 3/8 inch end and a ¼ inch end for mounting cameras, microphones etc on top of your monitor

I liked the original concept of mounting to the back of your monitor but figured people would like to be able to add cameras/micrphones etc. that could stick out above the monitor
