@feesh
Thank you for sharing; that would be amazing if they offered an aftermarket.
1 Like
Replying to this topic because I think the laptop really needs this. I move my laptop around a lot and the screen always opens to 180 on its own
4 Likes
The hinge opens too easily. Pushing it away (open) takes less force than closing it. So, picking it up results in the lip flopping open almost all the way. Needs to be a tiny bit tighter when pushing it open.
1 Like
Hinge definitely moves too easily on my Framework - every time I move around the laptop opens to 180 degrees (flat), its quite annoying.
2 Likes
Keep that in mind while adjusting the tension nut on the hinges. Of course you can adjust them to fit your liking. Just make sure they take almost the same amount of force to move.
Clarification:
That post is a misunderstanding. The framework hinge is non-adjustable, which as I said for the 4th time, seem to be a engineering oversight.
If your hinge is so loose it will fall flat, contact customer support. Framework have some tight hinges that they send out for replacement.
3 Likes
Hinges on Framework need to be sturdier, for sure. I consider this, along with the trackpad, to be design flaws.
Just to confirm the hinges are fine on my machine and so is the trackpad.
Have to say my hinges are pretty stiff. Only had it a week though…
1 Like
Same here, the hinge on my laptop doesn’t move even if I shake the laptop around
1 Like
Mine seems to have become looser over time, and now will often fall flat if I have it open past 90 degrees and stand up/move around. Would also appreciate an option for a stiffer hinge.
I’m also interested in a tighter hinge. Would really appreciate the option to purchase it from the marketplace.
+1 to needing a sturdier hinge. Mine also falls down to 180 degrees with just normal usage if it’s sitting anywhere past 100 degrees. I’ve had mine since 9/2021, it does seem to have gotten worse as time goes on, getting to be a real problem within the last month.
2 Likes
Another +2 (2 hinges, right? =) for slightly higher torque hinges.
That’s their response. Kinda sucks, cause I don’t think I should have to pay to fix the fact that screen literally falls on its own, and still waiting on it. Guess that’s what repairable means lol, pay to fix design issues
1 Like
Hi. It seems as though your ‘complaint’ wasn’t treated as such i.e. wasn’t checked under warranty.
Further given the previous concern about the lid bending some 1cm a stiffer hinge would only exacerbate that ‘problem’
@Norman_Paulino - if you can send them a video showing the screen opening due to its own weight while stationary on a table, I would be surprised if they did not consider it to be a warranty replacement. Mine wasn’t quite that bad, but it got on my nerves enough that I bought new hinges and replaced them. Now the screen is much more stable. If a stiffer hinge option is ever available, I’ll likely switch to that. These were pretty stiff when new, I’m trying to pay attention to whether they get looser with usage.
1 Like
Hi maybe you could comment on this topic, the concern being the flexing of the screen/top, in that with stiffer hinges it would flex more.
Have you noticed
I would also be interested in a stiffer or adjustable hinge. My lid falls completely open over about a 3-5 minute period. It has been getting progressively worse over time. Otherwise I love the unit