# Input connector shim - for power switch, USB 2.0 and LEDs

**URL:** <https://community.frame.work/t/input-connector-shim-for-power-switch-usb-2-0-and-leds/21430>\
**Category:** Mainboard\
**Created:** [August 16, 2022, 2:53am UTC](https://community.frame.work/t/input-connector-shim-for-power-switch-usb-2-0-and-leds/21430 "2022-08-16T02:53:13Z")\
**Posts on this page:** 1\
**Showing post:** 45

<div class="post-metadata">

**Author:** ![A.Zerty](https://avatars.discourse-cdn.com/v4/letter/a/eb9ed0/32.png) [@A.Zerty](https://community.frame.work/u/A.Zerty)\
**Post date:** [June 6, 2025, 6:46pm UTC](https://community.frame.work/t/input-connector-shim-for-power-switch-usb-2-0-and-leds/21430/45 "2025-06-06T18:46:38Z")

</div>

For my project, I need to put all in a small and unique piece of PCB.  
If you want something like a breakout board, I suggest using @Dylan_Evans’s design with a bigger FPC or like [this topic](https://community.frame.work/t/resolved-diy-usb-2-0-hub-instead-of-fingerprint-reader/43325).

In my current design, I use 5VALW for:

- USB2.0 hub (SL2.1A)
- Power led
- Fingerprint connector

And I use 5VS for all USB C connector.  
Since that is my first PCB, I have surely done many errors …

---

_[View the full topic](https://community.frame.work/t/input-connector-shim-for-power-switch-usb-2-0-and-leds/21430)._