# Issue of touchpad spacers and the number of customers bothered by it

**URL:** <https://community.frame.work/t/issue-of-touchpad-spacers-and-the-number-of-customers-bothered-by-it/43362>\
**Category:** Framework Laptop 16\
**Tags:** framework-laptop-16-amd-7040\
**Created:** [January 11, 2024, 12:39pm UTC](https://community.frame.work/t/issue-of-touchpad-spacers-and-the-number-of-customers-bothered-by-it/43362 "2024-01-11T12:39:01Z")\
**Posts on this page:** 1\
**Showing post:** 189

<div class="post-metadata">

**Author:** ![James3](https://avatars.discourse-cdn.com/v4/letter/j/b5e925/32.png) [@James3](https://community.frame.work/u/James3)\
**Post date:** [February 14, 2026, 9:51am UTC](https://community.frame.work/t/issue-of-touchpad-spacers-and-the-number-of-customers-bothered-by-it/43362/189 "2026-02-14T09:51:23Z")

</div>

You can get 3d printed full width touchpad here:

> [@\[EU\] Custom 3D Printed FW16 single piece input cover 15€ each](https://community.frame.work/t/eu-custom-3d-printed-fw16-single-piece-input-cover-15-each/75593/34):
>
> So I went for black, green and in the end I sticked with transparant white. I ordered for my brother silver-gray-metal. I’m very happy with the quality. The black and green are a bit better than the transparent white one. I had to polish the the touchpad cutout, the left touchpad button got stuck under the 3d printed plastic, after removing a few millimeters of the 3d printed plastic plastic its all peachy. I also learned that you can unscrew and re-screw the touchpad like 5-6 times and it sti…

---

_[View the full topic](https://community.frame.work/t/issue-of-touchpad-spacers-and-the-number-of-customers-bothered-by-it/43362)._