# Looking for datasheet for the PixArt PCT3854QR in touchpad module

**URL:** <https://community.frame.work/t/looking-for-datasheet-for-the-pixart-pct3854qr-in-touchpad-module/42830>\
**Category:** Mainboard\
**Created:** [December 31, 2023, 3:26am UTC](https://community.frame.work/t/looking-for-datasheet-for-the-pixart-pct3854qr-in-touchpad-module/42830 "2023-12-31T03:26:38Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![Jeong\_Min\_Lim](https://avatars.discourse-cdn.com/v4/letter/j/e47774/32.png) [@Jeong\_Min\_Lim](https://community.frame.work/u/Jeong_Min_Lim)\
**Post date:** [February 14, 2024, 12:57am UTC](https://community.frame.work/t/looking-for-datasheet-for-the-pixart-pct3854qr-in-touchpad-module/42830/12 "2024-02-14T00:57:53Z")

</div>

I would assume there should be a way to read data coming from the touchpad module itself, but I think it’s hard to tell what is exactly going on without the data sheet. I bought breakout board for the 51 pin connector (Something like [this](https://www.aliexpress.us/item/2251832656865723.html)) and connected the I2C pins / 5V / GND to Raspberry Pi. Using [I2C dump](https://linux.die.net/man/8/i2cdump) I saw some data output from the touchpad, but again unsure what any of that means. I also saw CRImier’s input controller board but as far as I know that one also only works for the keyboard, not the touchpad

---

_[View the full topic](https://community.frame.work/t/looking-for-datasheet-for-the-pixart-pct3854qr-in-touchpad-module/42830)._
