Chiming in as another batch 11 Sage owner.
I wanted to include my story as I didn’t see it mentioned in this thread so far, though admittedly I was only able to skim the 1000+ posts and search for some keywords.
My issue first presented itself back in January as an issue with my audio card. I would occasionally lose the audio in my left speaker, and I wasn’t sure why. I opened the machine and checked the audio card and nothing appeared physically out of sorts, so I put it back together. Note that I was not looking for cracks at this time, so I can’t say for certain what the status of my bottom case was, but I’ll explain how it relates shortly.
I then found this thread which seemed to match my issue: Speaker failure when getting warm and was where I first got clued into the heat factor from the battery charging being the causal factor. Once I learned that it became clear that the audio issue happened shortly after plugging the machine in to charge.
About a month ago the issue quickly for notably worse, and within the last 3 weeks it got to the point where my left audio channel almost never works, and when I plug the machine in both channels stop working, making the machine effectively mute.
I realized something must have physically changed, so when I had some free time I went to open the machine again and check the audio card, and when I flipped it over I got to discover this pretty sight:
Not the clearest picture, but that is a 4-5cm long crack from the bottom corner of that expansion slot towards the middle of the case.
I believe my audio issues may have been due to this bottom case crack issue the entire time. I’m guessing that the crack began from the inside around January (about 2-3months after receiving, and a similar time frame to what some others in this thread saw) which gave enough tolerance for the audio board pins to not fully engage when the case expands slightly during battery charging. My audio issue seemed to slowly get worse between January and mid March, which makes sense that the crack was expanding during that time. When it suddenly got significantly worse I’m guessing that the fatigue of the already damaged case allowed the crack damage to accelerate. I definitely had an “oh crap” moment when I flipped the machine over the other day and saw what happened, but it makes sense that the crack is the culprit since you can restore speaker function by gently squeezing the case together in the cracked area.
I just opened a support request, and am hopeful to get one of the post “2025 week 50” replacements, but I figured since no one else had mentioned the audio issue that it might be useful to relay here in case it helps someone else.
