My device shut down after power cable plugged in. Then, my device cannot be turn on but the power button still light on for moments. Then, I remove the battery and put it back. Now, the fan is on but it still not boot. I do not even see the framework logo page.
My device is with windows 11 and 11th gen core i7. I use a anker charger.
Hi and welcome to the forum.
Have you had the laptop not connected to power for a week or more?
There is an issue with the CMOS/RTC battery [ML1220] discharging quicker that expected as it is not charged from the internal battery.
This can cause a ‘blip’ in the CPU and the option then is to do a mainboard reset.
If this happens more frequently it means your use, powered on, is not frequent enough to keep the Ml1220 healthy and you may soon want to replace it.
Lots of info at
1 Like
There’s a good chance you could be having issues with the CMOS battery, but I would also recommend reaching out to support if you haven’t already as they can also help you diagnose your issue!
1 Like
I am running a FW 13 with i5-1135G7, 16 GB RAM, 256 GB NV-Me storage. Have started having issues with it not powering on if it has sat powered off for more than an hour or so. If I plug it in and then press the power button, the button lights up but it doesn’t power on. I then unplug it an press the power button and it will power on and oddly, the time is off. I have gone through re-seating everything but still facing the same issue. I have ordered a new finger print reader hoping that it’s just something loose there but not sure. Any assistance is appreciated. Thanks.
Hi and welcome.
Have you noted the CMOS battery can die if not kept charged which then can prompt a flaw in the Intel CPU
Check the online guides for a main board reset and also check the voltage of the CMOS battery (ML 1220) if you can. If it’s below 2.8V it shows a problem and Framework will send you a replacement.
2 Likes