[RESPONDED] Dmesg errors

Framework Laptop 16 Linux
1

@Matt_Hartley Is this something I should be concerned by?

Here’s the HTML I copied out of the terminal, which includes formatting that makes it easier to see the errors: dmesg framework ($3690565) · Snippets · GitLab

I was testing my HDMI, DisplayPort, and Ethernet adapters and the following showed up in dmesg:

[  800.505312] usb 7-1: new full-speed USB device number 3 using xhci_hcd
[  800.687401] usb 7-1: New USB device found, idVendor=32ac, idProduct=0002, bcdDevice= 0.00
[  800.687415] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  800.687421] usb 7-1: Product: HDMI Expansion Card
[  800.687426] usb 7-1: Manufacturer: Framework
[  800.687430] usb 7-1: SerialNumber: 11AD1D00A49C401224360B00
[  800.771427] hid-generic 0003:32AC:0002.0013: hiddev1,hidraw4: USB HID v1.11 Device [Framework HDMI Expansion Card] on usb-0000:c4:00.4-1/input1
[  806.988926] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[  807.106662] ucsi_acpi USBC000:00: unknown error 256
[  807.106676] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-5)
[  807.330094] ucsi_acpi USBC000:00: possible UCSI driver bug 1
[  807.330111] ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-22)
[  807.486413] ucsi_acpi USBC000:00: unknown error 256
[  807.486422] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-5)
[  807.647023] ucsi_acpi USBC000:00: possible UCSI driver bug 1
[  807.647038] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-22)
[  838.533362] usb 7-1: USB disconnect, device number 3
[  840.738515] ucsi_acpi USBC000:00: possible UCSI driver bug 1
[  840.738532] ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-22)
[  840.752981] usb 7-1: new full-speed USB device number 4 using xhci_hcd
[  840.842141] ucsi_acpi USBC000:00: unknown error 256
[  840.842151] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-5)
[  840.934248] usb 7-1: New USB device found, idVendor=32ac, idProduct=0002, bcdDevice= 0.00
[  840.934256] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  840.934260] usb 7-1: Product: HDMI Expansion Card
[  840.934264] usb 7-1: Manufacturer: Framework
[  840.934267] usb 7-1: SerialNumber: 11AD1D00A49C401224360B00
[  841.014299] ucsi_acpi USBC000:00: unknown error 256
[  841.014307] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-5)
[  841.015628] hid-generic 0003:32AC:0002.0014: hiddev1,hidraw4: USB HID v1.11 Device [Framework HDMI Expansion Card] on usb-0000:c4:00.4-1/input1
[  841.074900] Registered IR keymap rc-cec
[  841.074969] rc rc0: DP-3 as /devices/pci0000:00/0000:00:08.1/0000:c2:00.0/rc/rc0
[  841.075009] input: DP-3 as /devices/pci0000:00/0000:00:08.1/0000:c2:00.0/rc/rc0/input28
[  841.123912] audit: type=1107 audit(1711149718.141:95): pid=637 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/freedesktop/login1" interface="org.freedesktop.DBus.Properties" member="PropertiesChanged" name=":1.19" mask="receive" pid=2702 label="snap.firefox.firefox" peer_pid=737 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=102 hostname=? addr=? terminal=?'
[  847.181401] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[  847.367192] ucsi_acpi USBC000:00: unknown error 256
[  847.367204] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-5)
[  852.557014] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[  855.402417] ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-5)
[  855.485036] usb 7-1: USB disconnect, device number 4
[  855.501969] ucsi_acpi USBC000:00: possible UCSI driver bug 1
[  855.501980] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-22)
[  863.945901] audit: type=1107 audit(1711149740.965:96): pid=637 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/freedesktop/login1" interface="org.freedesktop.DBus.Properties" member="PropertiesChanged" name=":1.19" mask="receive" pid=2702 label="snap.firefox.firefox" peer_pid=737 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=102 hostname=? addr=? terminal=?'
[  875.918988] ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-5)
[  876.051014] ucsi_acpi USBC000:00: possible UCSI driver bug 1
[  876.051026] ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-22)
[  876.907046] ucsi_acpi USBC000:00: unknown error 256
[  876.907060] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-5)
[  877.061500] usb 7-1: new full-speed USB device number 5 using xhci_hcd
[  877.245291] usb 7-1: New USB device found, idVendor=32ac, idProduct=0003, bcdDevice= 0.00
[  877.245307] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  877.245314] usb 7-1: Product: DisplayPort Expansion Card
[  877.245318] usb 7-1: Manufacturer: Framework
[  877.245323] usb 7-1: SerialNumber: 11AD1D00A49C400F210A0B00
[  877.329715] hid-generic 0003:32AC:0003.0015: hiddev1,hidraw4: USB HID v1.11 Device [Framework DisplayPort Expansion Card] on usb-0000:c4:00.4-1/input1
[  883.277463] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[  883.442735] ucsi_acpi USBC000:00: unknown error 256
[  883.442745] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-5)
[  888.653457] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[  888.811104] ucsi_acpi USBC000:00: possible UCSI driver bug 1
[  888.811114] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-22)
[  891.065584] usb 7-1: USB disconnect, device number 5
[  892.439399] ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-5)
[  892.574905] ucsi_acpi USBC000:00: unknown error 256
[  892.574920] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-5)
[  893.053088] usb 7-1: new full-speed USB device number 6 using xhci_hcd
[  893.071216] audit: type=1107 audit(1711149770.089:97): pid=637 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/freedesktop/login1" interface="org.freedesktop.DBus.Properties" member="PropertiesChanged" name=":1.19" mask="receive" pid=2702 label="snap.firefox.firefox" peer_pid=737 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=102 hostname=? addr=? terminal=?'
[  893.236600] usb 7-1: New USB device found, idVendor=32ac, idProduct=0003, bcdDevice= 0.00
[  893.236614] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  893.236620] usb 7-1: Product: DisplayPort Expansion Card
[  893.236624] usb 7-1: Manufacturer: Framework
[  893.236628] usb 7-1: SerialNumber: 11AD1D00A49C400F210A0B00
[  893.295486] hid-generic 0003:32AC:0003.0016: hiddev1,hidraw4: USB HID v1.11 Device [Framework DisplayPort Expansion Card] on usb-0000:c4:00.4-1/input1
[  898.893525] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[  899.154757] ucsi_acpi USBC000:00: possible UCSI driver bug 1
[  899.154767] ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-22)
[  899.310638] ucsi_acpi USBC000:00: possible UCSI driver bug 1
[  899.310645] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-22)
[  899.483493] ucsi_acpi USBC000:00: unknown error 256
[  899.483508] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-5)
[  902.917812] usb 7-1: USB disconnect, device number 6
[  904.457106] usb 7-1: new full-speed USB device number 7 using xhci_hcd
[  904.644678] usb 7-1: New USB device found, idVendor=32ac, idProduct=0003, bcdDevice= 0.00
[  904.644686] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  904.644690] usb 7-1: Product: DisplayPort Expansion Card
[  904.644693] usb 7-1: Manufacturer: Framework
[  904.644695] usb 7-1: SerialNumber: 11AD1D00A49C400F210A0B00
[  904.727349] hid-generic 0003:32AC:0003.0017: hiddev1,hidraw4: USB HID v1.11 Device [Framework DisplayPort Expansion Card] on usb-0000:c4:00.4-1/input1
[  910.669712] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[  910.867310] ucsi_acpi USBC000:00: unknown error 256
[  910.867324] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-5)
[  910.944036] audit: type=1107 audit(1711149787.965:98): pid=637 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_signal"  bus="system" path="/org/freedesktop/login1" interface="org.freedesktop.DBus.Properties" member="PropertiesChanged" name=":1.19" mask="receive" pid=2702 label="snap.firefox.firefox" peer_pid=737 peer_label="unconfined"
                exe="/usr/bin/dbus-daemon" sauid=102 hostname=? addr=? terminal=?'
[  916.045589] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[  916.246912] ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-5)
[  921.421496] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[  921.530888] ucsi_acpi USBC000:00: unknown error 256
[  921.530903] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-5)
[  926.797548] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[  926.906918] ucsi_acpi USBC000:00: unknown error 256
[  926.906929] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-5)
[  932.173595] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[  932.287379] ucsi_acpi USBC000:00: unknown error 256
[  932.287391] ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-5)
[  937.549201] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
[  957.166065] usb 1-1: USB disconnect, device number 2
[  962.691112] ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-5)
[  962.789772] usb 7-1: USB disconnect, device number 7
[  962.810184] ucsi_acpi USBC000:00: possible UCSI driver bug 1
[  962.810191] ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-22)
[  982.174089] usb 2-2.3: new SuperSpeed USB device number 6 using xhci_hcd
[  982.193960] usb 2-2.3: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=31.04
[  982.193966] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[  982.193968] usb 2-2.3: Product: USB 10/100/1G/2.5G LAN
[  982.193969] usb 2-2.3: Manufacturer: Realtek
[  982.193971] usb 2-2.3: SerialNumber: 4013000001
[  982.301548] usbcore: registered new device driver r8152-cfgselector
[  982.570312] r8152-cfgselector 2-2.3: reset SuperSpeed USB device number 6 using xhci_hcd
[  982.629545] r8152 2-2.3:1.0: ram code speedup mode fail
[  982.629554] r8152 2-2.3:1.0: load rtl8156b-2 v2 04/27/23 successfully
[  982.670214] r8152 2-2.3:1.0 (unnamed net_device) (uninitialized): netif_napi_add_weight() called with weight 256
[  982.670626] r8152 2-2.3:1.0 eth0: v1.12.13
[  982.670662] usbcore: registered new interface driver r8152
[  982.674216] usbcore: registered new interface driver cdc_ether
[  982.675444] usbcore: registered new interface driver cdc_ncm
[  982.676888] usbcore: registered new interface driver cdc_wdm
[  982.677741] usbcore: registered new interface driver cdc_mbim
[  982.709959] r8152 2-2.3:1.0 enx9cbf0d004c7a: renamed from eth0
[RESPONDED] HDMI card does not work in slot 4
2

Are your display cards working? Looks to me like your DP and HDMI expansion cards are repeatedly disconnecting and reconnecting. I just noticed I’m getting some similar errors with my HDMI card but it seems to be staying connected, I don’t currently have a display on hand to test it with though so I’m not sure.

3

I was manually plugging and unplugging the cards during that test. I was swapping the three cards in and out of a single slot. The display cards worked fine, and the ethernet appeared to work - it showed up but I didn’t plug in a cable.

4

Interesting. Based on the errors, my best guess is that for some reason it takes a few tries for the USB-C port to properly switch to the alt mode for the display. Not sure why that is, but if you’re able to use the display just fine then it must be able to successfully switch over after a few attempts. Definitely something to look into more if you have external display problems, but if everything works fine it’s probably not something to worry about. Keep your eyes out for any problems with those cards though.

5

Agree with @Owen , please keep us updated if you noticed any weird behaviors with your display.

6

Logs can be really noisy. But, while we’re seeing ACK fails and “possible driver bug” errors, the logs are not indicating when it gets past this and is successful. My guess is that it’s expecting behavior differing from what it is seeing. But as other have pointed out, if things are working you’re fine.

Errors like these bundled with non-functional devices, this would then be part of a bug report. In this instance, it’s due to the removal and reinsertion of the said devices. So you’re fine.

1 Like
7

Yeah, I didn’t report it to support since the cards work

Both HDMI and DP external displays no longer working
8

New AMD Laptop 16 customer (batch 6), also noticing these messages on fresh boot…

journalctl -k --priority=3 --boot=0                                                                                                   ✔ 
Mar 29 15:10:26 AMDRyzen7040 kernel: cros_ec_lpcs cros_ec_lpcs.0: EC ID not detected
Mar 29 15:10:28 AMDRyzen7040 kernel: ucsi_acpi USBC000:00: unknown error 256
Mar 29 15:10:28 AMDRyzen7040 kernel: ucsi_acpi USBC000:00: con3: failed to register partner alt modes (-5)
Mar 29 15:10:28 AMDRyzen7040 kernel: ucsi_acpi USBC000:00: unknown error 256
Mar 29 15:10:28 AMDRyzen7040 kernel: ucsi_acpi USBC000:00: con3: failed to register partner alt modes (-5)
Mar 29 15:10:28 AMDRyzen7040 kernel: ucsi_acpi USBC000:00: unknown error 256
Mar 29 15:10:28 AMDRyzen7040 kernel: ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-5)
Mar 29 15:10:29 AMDRyzen7040 kernel: ucsi_acpi USBC000:00: unknown error 256
Mar 29 15:10:29 AMDRyzen7040 kernel: ucsi_acpi USBC000:00: con4: failed to register partner alt modes (-5)
Mar 29 15:10:35 AMDRyzen7040 kernel: ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
Mar 29 15:10:35 AMDRyzen7040 kernel: ucsi_acpi USBC000:00: unknown error 256
Mar 29 15:10:35 AMDRyzen7040 kernel: ucsi_acpi USBC000:00: con3: failed to register partner alt modes (-5)
Mar 29 15:10:40 AMDRyzen7040 kernel: ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110)
Mar 29 15:10:40 AMDRyzen7040 kernel: ucsi_acpi USBC000:00: unknown error 256
Mar 29 15:10:40 AMDRyzen7040 kernel: ucsi_acpi USBC000:00: con3: failed to register partner alt modes (-5)

As far as I can tell, all ethernet/DP/USB modules are functioning that have something plugged into them. I would feel better about ignoring these journal entries if they were priority 4-6 (warning, notice, info) and not flagged as priority 3 (error)… but no one here is too worried about them yet, so I guess that’s somewhat encouraging.

What I’d be interested to know is what these “con 3”/“con 4” entries map to… how can we figure that out? I understand that these are USB-C connections, and likely connect all the modules (I’m thinking ones we add plus those internal like wifi) to the system.

Is it possible that the con string/id completes the mapping to the full name? i.e.

cat /sys/class/hwmon/hwmon9/name && cat /sys/class/hwmon/hwmon1[013]/name                                                             
ucsi_source_psy_USBC000:001
ucsi_source_psy_USBC000:002
ucsi_source_psy_USBC000:003
ucsi_source_psy_USBC000:004

Assuming these are like root hubs or buses… how do we find our which of our devices/modules are connected to which? I tried running lsusb -t but saw no mention of these “parent devices/nodes”. i.e. buses went up to 8, ports went up to 5.

lsusb -vt                                                                                                                             ✔ 
/:  Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/5p, 480M
    ID 1d6b:0002 Linux Foundation 2.0 root hub
    |__ Port 001: Dev 002, If 0, Class=Billboard, Driver=[none], 12M
        ID 32ac:0003  
    |__ Port 001: Dev 002, If 1, Class=Human Interface Device, Driver=usbhid, 12M
        ID 32ac:0003  
    |__ Port 002: Dev 003, If 0, Class=Hub, Driver=hub/4p, 480M
        ID 05e3:0610 Genesys Logic, Inc. Hub
        |__ Port 003: Dev 005, If 0, Class=Audio, Driver=snd-usb-audio, 480M
            ID 054c:0ce6 Sony Corp. DualSense wireless controller (PS5)
        |__ Port 003: Dev 005, If 1, Class=Audio, Driver=snd-usb-audio, 480M
            ID 054c:0ce6 Sony Corp. DualSense wireless controller (PS5)
        |__ Port 003: Dev 005, If 2, Class=Audio, Driver=snd-usb-audio, 480M
            ID 054c:0ce6 Sony Corp. DualSense wireless controller (PS5)
        |__ Port 003: Dev 005, If 3, Class=Human Interface Device, Driver=usbhid, 480M
            ID 054c:0ce6 Sony Corp. DualSense wireless controller (PS5)
    |__ Port 003: Dev 004, If 0, Class=Hub, Driver=hub/3p, 480M
        ID 05e3:0610 Genesys Logic, Inc. Hub
        |__ Port 002: Dev 007, If 0, Class=Human Interface Device, Driver=usbhid, 12M
            ID 32ac:0014  
        |__ Port 002: Dev 007, If 1, Class=Human Interface Device, Driver=usbhid, 12M
            ID 32ac:0014  
        |__ Port 002: Dev 007, If 2, Class=Human Interface Device, Driver=usbhid, 12M
            ID 32ac:0014  
        |__ Port 002: Dev 007, If 3, Class=Human Interface Device, Driver=usbhid, 12M
            ID 32ac:0014  
    |__ Port 004: Dev 006, If 0, Class=Hub, Driver=hub/4p, 480M
        ID 05e3:0610 Genesys Logic, Inc. Hub
        |__ Port 001: Dev 009, If 0, Class=Vendor Specific Class, Driver=[none], 12M
            ID 27c6:609c Shenzhen Goodix Technology Co.,Ltd. 
        |__ Port 002: Dev 010, If 0, Class=Human Interface Device, Driver=usbhid, 12M
            ID 32ac:0012  
        |__ Port 002: Dev 010, If 1, Class=Human Interface Device, Driver=usbhid, 12M
            ID 32ac:0012  
        |__ Port 002: Dev 010, If 2, Class=Human Interface Device, Driver=usbhid, 12M
            ID 32ac:0012  
        |__ Port 002: Dev 010, If 3, Class=Human Interface Device, Driver=usbhid, 12M
            ID 32ac:0012  
    |__ Port 005: Dev 008, If 0, Class=Wireless, Driver=btusb, 480M
        ID 0e8d:e616 MediaTek Inc. 
    |__ Port 005: Dev 008, If 1, Class=Wireless, Driver=btusb, 480M
        ID 0e8d:e616 MediaTek Inc. 
    |__ Port 005: Dev 008, If 2, Class=Wireless, Driver=[none], 480M
        ID 0e8d:e616 MediaTek Inc. 
/:  Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/2p, 10000M
    ID 1d6b:0003 Linux Foundation 3.0 root hub
    |__ Port 002: Dev 002, If 0, Class=Hub, Driver=hub/3p, 10000M
        ID 05e3:0625 Genesys Logic, Inc. 
/:  Bus 003.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/1p, 480M
    ID 1d6b:0002 Linux Foundation 2.0 root hub
    |__ Port 001: Dev 002, If 0, Class=Video, Driver=uvcvideo, 480M
        ID 0bda:5634 Realtek Semiconductor Corp. 
    |__ Port 001: Dev 002, If 1, Class=Video, Driver=uvcvideo, 480M
        ID 0bda:5634 Realtek Semiconductor Corp. 
/:  Bus 004.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/1p, 10000M
    ID 1d6b:0003 Linux Foundation 3.0 root hub
/:  Bus 005.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/1p, 480M
    ID 1d6b:0002 Linux Foundation 2.0 root hub
/:  Bus 006.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/1p, 10000M
    ID 1d6b:0003 Linux Foundation 3.0 root hub
    |__ Port 001: Dev 002, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
        ID 0bda:8156 Realtek Semiconductor Corp. 
/:  Bus 007.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/1p, 480M
    ID 1d6b:0002 Linux Foundation 2.0 root hub
/:  Bus 008.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/1p, 10000M
    ID 1d6b:0003 Linux Foundation 3.0 root hub

hmm, odd that some of the devices are listed multiple times, like the Port 005: Dev 008, If 1, Class=Wireless, Driver=btusb, 480M ID 0e8d:e616 MediaTek Inc.

1 Like