Mine has been given to a “trusted third-party vendor” and the expected delivery date is not available anymore. 
delivered.
Also delivered over here (Belgium). Time to assemble the DIY version and install on os later today!
Mine arrived today.
Ordered RAM (Crucial 32GB Kit) and SSD (Samsung 980 Evo) separately, so the device came only with charger and modules.
DIY “build” was VERY easy, 10-15 minutes max.
Win10 Pro Setup via USB Stick was done in about 3 minutes, this thing rips!
So far everything is stable and the driver package installed without problems.
Very happy right now! 
1 Like
I have finally got it!!! So happy!
It took me 10 minutes to put it together and I am installing fedora right now.
2 Likes
Mine is stuck in a delivery center 5 kms from my house for the past 10 hrs with an estimated delivery date as tomorrow morning but now it says delivery window not available 
Up and running Memtest86 
Did any of you guys try memtest ? My CPU is running hot and the fan is going crazy pushing loads of scolding hot air.
It’s going extremely fast for 64GB tho, so it might be normal. 30 minutes for that much memory really shows these CPUs are monsters.
Assembly was trickier than expected. I repair phones and laptops all the time but I struggled with the input cover. The connector doesn’t really click as the instruction said, and aligning the cover itself took multiple tries. (and it’s still not perfectly centered 
)
I’m delighted. I played Baldur’s Gate 3 (on the Windows 11 Pro partition) for about 4 hours tonight, and it was completely stable and ran extremely well 
I think I had bad thermal paste guys. The fan was screaming just booting windows 11
The system did not report throttling, but the fan was a high pitched jet engine. CPU stayed between 85 and 90 with a 30W package consumption, so it wasn’t obvious. The thermal paste layer was even but seemed way too thick, like .3mm or something.
A repaste with PTM7950 made the system almost fanless while browsing, dropped 10 degress running cinebench R23, with a score increase from 11000 to 13000. No fan for the first two minutes of memtest86+ 
Check your machines, I’m probably not the only one in this batch. If opening a web browser spools the fan hard immediately, you might have an issue.
4 Likes
Received my batch 6 AMD mainboard & CoolerMaster case last week, but didn’t have time to put it all together until Sunday.
Replaced the 11th gen batch 5 mainboard with the new AMD board, which took about 20 minutes, then installed the 11th gen into the CoolerMaster case.
Everything works and I’m a happy camper.
Mine (Belgium) arrived at FedEx Heusden-Zolder today around a little after 9 in the morning. Against my expectations, it got delivered today
I know what to do this evening…
1 Like
No, the delivery is scheduled for today but the tracking says it’s still near Caserta
Tbh I don’t think it will be delivered today
Mine got delivered yesterday, initial impressions seem really good. Only issue seems to be track pad is misaligned a bit and there is a double left click
Have you contacted support? Perhaps you just need to unscrew it a bit and align, otherwise they can RMA it
Does “On the way [LOCATION]” mean On the way FROM [LOCATION] or TO [LOCATION]?
Not yet, probably I will tonight
1 Like