Having more issues, just tried to turn my computer on and the display was flickering ever couple of seconds, so naturally i tried to restart it and it wont boot. Im on Windows 11, latest bios/driver package. For a moment it tried to repair my drive, but now all it does when the power button is pressed is blink the status lights red twice. I tried booting without the graphics card to at least get into bios or boot from safe mode but alas no luck. I could have also sworn fro a moment the light blinked orange and green. When I plug it in the light goes white as it should (or blinks red when the input modules and midplate are removed. No clue what to do.
Edits:
Without battery, blinks red/blue, probably cause it’s missing the battery.
Acts sorta normal if the “sw3” switch is held down. But with 0 signs of life.
Sometimes after I press sw3 and hit the power button it blinks red 6 times. I believe this is important because the second flash in the original 2 seems to be cut short.
Attached the midplate cable, red light blinked 15 times (?)
I was submitting a support ticket and it did a POST diagnostic! Sadly, I didn’t catch it in time to write it down, so no clue what it said. I’ve tried replicating it to no avail.
Left for a second and came back to it, no signs of life except when I remove the battery while its plugged in, it does the red/blue. On putting the battery back in, it has returned to the 2 blinks.
I am honestly so sick of this computer.