Framework Desktop with eGPU

Yes, I’m using the framework case and power supply. I haven’t had any issues other than the internal x4 slot having issues with the eGPU until recently. I’m attributing that change to the latest 3.06 firmware, but it’s possible that the fix was in a kernel update. I’m running Fedora 44.

Here’s the hardware I added. I’m not recommending anything here, just noting that is working for me.

  • JMT ADT-K993G-BK7 PCIE 5.0 X4 / M.2 NVMe to OCuLink SFF-8611 External Dock Adapter (K993G-BK7-R29Q-30cm)
  • be quiet! Power Zone 2 1200W, ATX 3.1, PCIe 5.1, 80+ Platinum Power Supply
  • XRIKUI NGFF M.2 M-Key to PCIe X4 Expansion Card Adapter
  • Glotrends 300mm PCIe 4.0 X4 Riser Cable - 180 degree straight
  • 2 AMD Radeon AI PRO R9700 Graphics Cards

I cut holes into the case with a Dremel. I didn’t really know where to cut so my cuts could have been cleaner. If anyone wants to follow, I’ve given sizes and locations in the images below that should allow for cleaner cuts.

The card is somewhat lose because it’s only held in by the slot. I’ll probably 3d print a brace to hold it at some point. My thought is to attach it to the fan screw.

Images: