I’m sorry. I didn’t mean to call you small! I’m sure you are very large and imposing! 
So imposing in fact, that out of sheer fear, Framework will develop a mechanical keyboard asap. Thank you, on behalf of all mech keeb fans!
4 Likes
Hah, if only.
I mean, it’s a 16 laptop, but it is still portable, I trust?
But it seems to be clear to you that the FW16 is too thin to support a mechanical keyboard.
Taking a quick look across the laptop space, it’s clear that laptops which prioritize thinness outsell laptops with a mechanical keyboard by an massive margin. If there’s a tradeoff to be made between them (which, if there’s no room for a mechanical keyboard, there clearly is), they would be crazy to make it thicker, appealing less to the majority of the market, just so they could appeal to a small niche in their first offering in the segment.
I guarantee the people manufacturing the Framework keyboard know a thing or two about keyswitches as well.
As someone who firmly prefers a chonky laptop with an RJ-45 port easily fitting in the side, a docking port, and a battery that can be swapped with no tools, I don’t find a new foray into the larger laptop space being absurdly thin the slight bit puzzling.
I may think it’s too conservative, and I may think it’s not ideal for what I want, but from looking at what sells today, it’s the obvious, safe choice.
1 Like
So during the course of this thread you have gone from rebutting my criticism of the keyboard space lacking headroom for discrete switches with “It is open hardware and there will be discrete switches from framework so everything’s cool for creators”, to “The computer would be undesirably thick if it had to accommodate discrete switches” to “I think the Cherry ULP will fit anyway, albeit with some jigery-pokery”. If indeed so, then why not provide sufficient headroom to start with? We are talking fractions of a millimetre here, and I thought we were past the stage where we were meant to covet narrowness at all costs. Even apple could not gaslight their users forever into believing the “butterfly” switches were the best choice.
The response from @Deuce is even more telling. We apparently agree that we would like a deeper 16" model but Deuce sees it as his duty to defend every decision Framework makes as if ordained from on high. I believe that is unhealthy and see it as more valuable to offer constructive criticism if I can do so.
I thought Framework was for those who have looked across the “laptop space” and rejected the prevailing orthodoxy? But we indeed see that framework built the 13" first and the expandable 16" later, they presumably expect the former to be their main seller even after the 16" comes out. I broadly agree with the keyboard choices on the 13" machine as an ultra-portable. Yes, I would have liked firmware driven keyboard controller like the 16", which seems a community driven feature that makes the omission of “mechanical” keyboard compatibility more glaring.
There’s a major difference between understanding why a decision was made and “defending it… as if ordained from on high”.
see it as more valuable to offer constructive criticism if I can do so.
You think that opening the conversation by suggesting that “they” may be trying to corner the Framework 16 keyboard module market was valuable constructive criticism?
If indeed so, then why not provide sufficient headroom to start with? We are talking fractions of a millimetre here, and I thought we were past the stage where we were meant to covet narrowness at all costs.
When the market research shows that, then we’ll be past it.
I thought Framework was for those who have looked across the “laptop space” and rejected the prevailing orthodoxy?
Framework is for a less unsustainable design. Everything else is second to that goal and is mostly an effort to “not suck”.
You’ll find this quote here:
The conventional wisdom in the industry is that making products repairable makes them thicker, heavier, uglier, less robust, and more expensive. We’re here to prove that wrong
(Emphasis mine)
2 Likes
Why yes I do, it is hardly unusual. For over 100 years Gillette have sold razors below cost and made their money selling the blades. Same with Nescafe and their Nespresso pods, and Nintendo and their game cartridges (or whatever games come on these days). As somebody keen to flex your knowledge of product marketing to the rest of us, I am surprised you are unaware of this common wheeze 
. It is probably good business, but not in line with FW values, IMO. And that is why I air it.
What market research proves an extra mil at most to make the 16" model compatible with laptop switches from the likes of Cherry, would ruin it? And is this more plausible than speculative intention to keep the keyboard design proprietary, or at least hard to replicate by third parties? I link to Cherry’s product to allow other readers to decide for themselves; note that 3.5mm is very close to the purported overall FW key module thickness.
My dog in this fight is a desire to see an Atreus (or similar staggered column) ergo design brought to market. Making it harder than needed to prototype or build modules at low volumes reduces the likelihood this will happen. We are dealing with very small measurements here which is what makes the decision not to accommodate commercially available key switches quite frustrating.
The reason we know it’s not something Framework is trying to do is because Framework has released detailed specifications and firmware for how to build your own keyboard without any license fees. They’ve already made it impossible for them to lock down the keyboard market through extra steps they’ve purposefully taken. They’ve stated that they’ll not block 3rd-party keyboards, and have proven that by making it possible for a 3rd-party to sell a compatible keyboard before they even ship their first laptop.
Thinking that they specifically looked at the keyboard switches you wanted, intentionally made the available dimensions just barely too small, and that prevents all 3rd-party keyboards is just silly. The keyboard I want can be built thanks to what Framework has released. A TKL module will exist as well, and likely not be an official product.
It doesn’t matter, Framework has specifically and publicly made it clear that their intent is to make a repairable, thin laptop. Any thickness added is counter to that goal. Presumably, in design, every fraction of a mm that could be shaved off was. Leaving completely unused space inside the closed laptop for the small sub-niche that needs to use a specific switch would be crazy.
It’s is way more plausible that they set a goal of making a thin laptop and that they didn’t add extra space because that would be the exact opposite of that goal. Part of the reason is that they’ve had a statement clearly indicating they were designing thin laptops on their website for years before they announced the 16" version. The other part of the reason is that they’ve specifically released all the information needed by third parties to replicate their keyboard in advance of samples of that keyboard being available.
There’s clear evidence that building a thin laptop is a design priority, and there’s clear evidence that the keyboard design is as open as possible. Taking that and concluding that there was a speculative intention to keep the keyboard design proprietary/hard to replicate is just ignoring all the evidence.
I have a layout I want as well, and I’ll take a full-throw tactile switch over a mushy short throw every time, but I’m not more upset that I (maybe) can’t use a Cherry MX ULP than I am that I can’t use a beam spring. It doesn’t fit without changing the hinges, and is therefore not suitable. Designing parts for laptops is hard and always involves trade-offs.
You’re inventing a conspiracy to prevent the use of a specific switch and ignoring all evidence that they clearly don’t really want to be in the keyboard business.
Anyway, I think my position is clear. Framework took the correct steps to achieve their stated goals. It’s fine to ask Framework to consider making it easier (or possible) to use the switch you want, but your assumption that they purposefully made it difficult or impossible to use your preferred switch is childish.
2 Likes
Framework seems to attract people who just can’t understand that the company needs to compete in the market to live, balancing features to appeal to as many as possible. And that means their laptops can’t be everything to everyone all at once. Just because it wasn’t built exactly to one’s particular wishes doesn’t mean it’s some great conspiracy or personal slight against you.
I suppose it’s “give someone an inch and they’ll take a mile”. Framework shows that they care about their users, providing a lot of resources and openness, and a few people will take that and then loudly complain that it’s not good enough, nowhere near good enough. Because the laptop doesn’t cater exactly to their every single desire.
Not the first, won’t be the last.
7 Likes
Well said.
Oh, so now it is simply that Framework has attracted the “wrong sort of person”. Who let in this riff-raff? If you were genuinely supporting their mission I think you would be less exclusionary in the your tone. In light of your strident advocacy for middle of the road, commercially safe design, and all us disagreeable people here, may I suggest it is actually you in the wrong place and might be happier shilling for Hewett Packard? 
Look I’m sorry but you can’t gaslight me into believing my frustrations are unreasonable and limited only to myself, clearly the instigator of the thread would have preferred “mechanical” switches. and Deuce admits as much himself. Threads on the subject have come and gone since the early days of the 13" - search the forums - and I am confident that it would have made the brainstorming of community features for consideration in the 16".
That’s a good one that needs unpacking. Firstly, where is the "conspiracy 'to which you allude? I speculate FW employ a business model which is in school grade economic textbooks, so hardly “Q-Anon”.
Secondly, if open hardware demonstrates they don’t want to be in the “keyboard business”, then since the whole kit n ’ caboodle is open that would equally apply to the rest of the computer? Perhaps they find the whole business of building and selling computers frightfully tiresome and that they secretly wish we would just go away and download the blueprints from github and build our own damn computers? Still thank you for the comment as it sparked the idea below.
So to attempt to drive the thread onwards to pastures more useful, I suggest that rather than attempting to develop keyboard modules for the laptop as-is, where having to custom-build a membrane style module will probably affect the prototyping and minimum order quantities needed, the better way would be to let the mountain move to Muhammed, and consider a modified case. That may be the easier thing to do because it is simply “metal-bashing” rather than custom rubber membranes and other gubbins and opens the door to small scale keyboards made with discrete switches. I will probably start a thread where readers may express interest in a fractionally deeper case so that a third party builder party can run with it.
Isn’t comparing the economics of razorblades and capsules to keyboards a bit far stretched? The lifetime of a keyboard is pretty long compared to the rest.
And well I also read a conspiracy theory to sell more keyboards out of your text. The rest of the laptop is so far off from that pattern.
So if you follow the rules of “The Rabbi”: “The first time someone calls you a horse you punch him on the nose, the second time someone calls you a horse you call him a jerk but the third time someone calls you a horse, well then perhaps it’s time to go shopping for a saddle.” - You might start looking for tinfoil.
1 Like
I think, as with any other business, FW wants to sell more product. Conspiracy theory indeed. Where has this obsession with conspiracy theories come from? I don’t think its healthy.
Did you mean The Prophet?
This thread has gone on long enough. Everyone has made their point but the hardware design is unlikely to change at this time.
Now that it is degenerating into personal attacks, breaking community guidelines, we will be closing it.
3 Likes