Oddly, I have found numerous posts on this issue, but none of the fixes seemed to work. I was just playing with some things and succesfully connected to my 6GHz network. I already had power save disabled. So, I enabled it the disabled it again. Disconnected from my 5GHz network and attempted to connect to my 6GHz network and voila!
freq: 6135.0
signal: -48 dBm
rx bitrate: 1921.5 MBit/s 160MHz HE-MCS 9 HE-NSS 2 HE-GI 0 HE-DCM 0
tx bitrate: 1729.6 MBit/s 160MHz HE-MCS 8 HE-NSS 2 HE-GI 0 HE-DCM 0
wlp13s0 IEEE 802.11 ESSID:"PuppyMonkeyBaby6"
Mode:Managed Frequency:6.135 GHz Access Point: XX:XX:XX:XX:XX:XX
Bit Rate=1.7296 Gb/s Tx-Power=3 dBm
IN-USE BSSID SSID MODE CHAN RATE SIGNAL BARS SECURITY
XX:XX:XX:XX:XX:XX PuppyMonkeyBaby24 Infra 4 130 Mbit/s 100 **** WPA2 WPA3
XX:XX:XX:XX:XX:XX PuppyMonkeyBaby5 Infra 157 270 Mbit/s 87 **** WPA2 WPA3
* XX:XX:XX:XX:XX:XX PuppyMonkeyBaby6 Infra 0 61 Mbit/s 72 *** WPA3
Unfortunately, it didn’t survive a reboot and now I cannot connect to my 6GHz network even after recreating what I did…