Standardized Framework 13 testing (WIP) thermals, battery life, performance, etc

[Adrian_Joachim]

@TheTRUEAsian

Maybe but we won’t know at this point since there’s no way to monitor fan speed.

ectool can query and set the fan speed just fine. I did all my test with fixed speed to eliminate the fancontroll bit.

@TheTRUEAsian

Well it shouldn’t seep out after application period. During my last application, I already put quite a lot as it was starting to pool up. As for the nail polish method, I’ve been using that to protect the SMDs however, there’s also the risk of it shorting other components on the mainboard.

It really should not seep that much, unless you used way too much (which people apparently do judging by some gpu board repair videos I have seen XD).

[Adrian_Joachim]

@Michael_Wu

Nice, could you post/point to how to increase the power limits? No rush or anything, I haven’t looked into it/just for the future

Alright here are my smokeless setting that got me around STAPM, I am not 100% all the changes are required but it works well like this:

Use at your own risk of course

[Michael_Wu]

Thanks! Will be a good starting point whenever I dive into this