[TRACKING] Unable to Install ANY Linux distro!

[knipp30]

@Mark_E_Jeffries

Where in BIOS do I reset BIOS settings? The only thing I saw was F9 - reset to default settings. I tried that and nothing changed.

Try this method:
Ppress the chassis intrusion switch (to the bottom-left of the midplate connector) 10 times while powered (about two seconds each time) and it should reset the BIOS settings

How does one reset the BIOS password (when forgotten) on the FW16?

Support has responded, and confirmed that I was correct that documentation didn’t exist: We acknowledge the link you’ve provided. To do a mainboard reset, Kindly follow these steps: Plug in the system to AC. Remove the Input Cover. Press the chassis open switch in the lower part of the RAM slot (encircled in yellow), you must press it slowly, so press for 2 seconds. Release, wait for the red blink on the Mainboard LEDs. Repeat. [alt image] Press the power button to boot the system BIOS set…

But yes, also get support involved