Accessing the bios on framework 13 in standalone mode

[djmcclary]

Is there a method for accessing the bios on the framework 13 installed in a cooler master case running in standalone mode? Other than the usual method for accessing the BIOS installed in a laptop. As this seems to be about drivers would perhaps a simple USB keyboard be in order?

How do I enter the BIOS on the Framework Laptop?

[nrp]

You can plug in a USB keyboard to hit F2.

[djmcclary]

The USB keyboard worked perfectly. I used a wireless mini keyboard with it’s USB dongle option to enter the BIOS. The initial attempt to use SteelSeries keyboards and mice during boot time was unsuccessful due to drivers required for those devices. Thank You for the quick response.

[balupton]

Just to confirm, does this advice also apply to the amd boards in the coolermaster case to enable standalone mode?

[balupton]

For the amd mainboard, there are additional instructions when running solely standalone:

AMD board solely in the coolermaster case?

Framework responded with the following regarding getting the mainboard to boot: Can you please try the following steps to fix the issue: Remove all the expansion cards. Remove the top cover of your Coolermaster case. Plug the power adapter directly from any of the expansion slots. Press the chassis open switch in the center of the main board 10 times, you must press it slowly, so press for 2 seconds. Release, and wait for the red blink on the motherboard LEDs. Press, etc. [alt image] Put e…