Anker power adaptor is incompatible with Framework 13

[Isak]

jookra guessed correctly. It’s the Power-Z KM003C.

[Brian_Gregory]

@Xavier_Jiang

I’m in china, so this is a chinese review of the 120. Says it support not the EPR (because it is capped at 20V 5A), but support FCP, SCP, AFC, QC3.0, QC4+, PD3.0 and PPS.

An EPR cable is needed for voltage >20V and/or current >3A. So 20V 5A needs an EPR cable.

Some of those other protocols are only applicable to chargers with USB-A outputs, though devices that have USB-C connectors that are designed to allow charging from USB-A chargers via leads that are USB-A at the charger end and USB-C at the other, may, in a few cases, understand them (typically small devices, phones etc).

[Charlie_6]

@Brian_Gregory

An EPR cable is needed for voltage >20V and/or current >3A. So 20V 5A needs an EPR cable

EPR cable is not required for 20V 5A

[Brian_Gregory]

@Charlie_6

EPR cable is not required for 20V 5A

Correct. I was muddling up the e-marker for 5A with the e-marker for EPR.
Maybe I’ll delete that part of my original comment.