[Solved] - System doesn't boot with new Kingston FURY Impact DDR5 5600 MHz CL40 SO-DIMM 32GB

Community Support
,
1

Kingston FURY Impact DDR5 5600 MHz CL40 SO-DIMM 32GB Memory Module Packing
doesn’t boot with my Laptop 13 DIY Edition (AMD Ryzen AI 300 Series)

It doesn’t matter if one or two stick in motherboard.
I waited for more than 5 minutes each try.

I guess I have to return RAM back to the shop and stay for a while with old 16 GB RAM.

2

I remember someone else recently had an issue with a ram kit on the newer AI300 series boards. They may just be a bit trickier on the timings that they will allow vs. the older processors. Kingston is a legit brand, just might have been some JEDEC timing that the board just did not want to POST with.

Seen lots of success with Cruicial, GSkill, and a few others. I would have thought Kingston would have worked just fine though the CL40 (or a subtiming thing) might be the issue.

Let us know how it turns out!

3

I’ve return back my 32 GB RAM sticks and got the same but 64 GB and it works.

Thanks to https://www.verkkokauppa.com/ for my experiments.