Webcam module (2nd gen) image has pink hue (esp. skin tones)

[Damian_Edwards]

I installed the 2nd gen webcam module in my Framework 13 AMD and it has a fairly strong pink hue, especially on skin tones, e.g. my face. I’m using Windows 11. Is there any way to adjust the hue via settings, custom LUT, etc.?

[Shiroudan]

On the old webcam I was able to customize camera settings (including hue) in the OBS settings panel for the webcam! Unsure about this one.
Windows 11 should have a settings panel for basic camera controls as well, saturation is there iirc? Not to sure, too long since I last used windows!

[amoun]

I imagine there is a blue ‘skin’ on the camera lens to stop scratching in transport, did you remove that, else you will get pink.

@sinatosk

• do the reverse of steps 7, 6 and 5
• remove blue cover from the camera
• do the reverse of steps 4, 3 and 2

[Damian_Edwards]

Yeah I removed that during installation. It’s kinda hard to miss

[Damian_Edwards]

Thanks. In the Windows camera settings panel, it improves if I bring the Saturation value down to around 50 (it defaults to 65 ish). Hopefully that comes through on actual calls.