External USB-C enclosure for input modules

[lbohn]

@nrp

I’m curious what it was. LED Matrix should “just work”.

Think it was this.

LED Matrix Schematic question/odd power up behavior

Ok, removing the line from the USB hub’s PGANG output to /SLEEP (and letting it float!) seems to have fixed the issue with the LED matrix card. I don’t fully understand /why/, so if someone at Framework could offer some hints about how /SLEEP and QSPI_* are connected on the production LED Matrix board that would cause /SLEEP to trigger the bootloader I’d appreciate it. It can’t “just” be connecting /SLEEP to GPIO0, because I do that on my seven-segment display input module as well and that doe…