Framework 13 Intel 11th Gen is no longer booting even after resetting the mainboard after accidentally letting it discharge.
I’ve reset it in the past and had it work just fine after. This time I figured the CMOS battery had finally had enough (stock one that was in it since 2021 or so), so I replaced it (with another ML1220, and checking the voltage seems good or at least better than the old one).
Still not booting, and based on the blink code everything is good except for 9 and 10: fan is not detected (and I do not hear it spinning) and the CPU is failing to reach s0. It seems 6 is sometimes red as well but I think it might just have to do with not properly seating the input cover connector? Now it will turn on briefly then turn off usually, then when turning on again will display the blink code diagnostic. Any idea on what I can do or do I just go for customer support?