Framework 16 to MXM Gpu - V0.1 Prototype design

Creators & Developers
,
114

Hi,

Here is an interested part of a schematic:

  1. It uses a different EEPROM chip.
  2. The SDA/SCL should go between 0 and VCC. You have VCC at 3.3V, so why is the SDA/SCL above 3.3V ??? 4.71 and 4.67

I cannot find any schematics that say what the SDA/SCL range is supposed to be coming from the FW16 mainboard.
Which pins on the inter-poser are you connecting them to?
Which PCB design program are you using ?

2 Likes