Does anyone know the dimensions of the front of the framework ethernet Expansion card?

Creators & Developers Expansion Card
1

Looking to design something with a similar size to it and looking for dimensions.

2

I have neither engineering drawings or a vernier caliper. However I do have an Ethernet module. Until someone comes along with more precise measurements, these might help:

  • 16.5 mm lateral protrusion from top cover.
  • 13.5 mm high (standard module is 9 mm) i.e. protruding face is 4.5 mm higher than standard.
  • 8.5 mm thick (standard module is 7 mm) i.e Ethernet sits 1.5 mm below the bottom cover.
1 Like
3

Stumbled upon this thread and happen to have the module and vernier caliper right in front of me.

My measurements are slightly different.

Ethernet module:
    total width      : 30.0 mm  
    total height     : 13.0 mm
    insert height    : 8.30 mm
    protrusion height: 4.70 mm  (calculated: 13.0 - 8.30)
    protrusion depth : 17.0 mm  (measured independently)
    insert depth     : 32.20 mm (measured independently)
    total depth      : 49.20 mm (measured end-to-end independently)

Standard module: 
    total width : 30.0 mm  
    total height: 6.65 - 7.00 mm (minor variations across modules)
    total depth : 30.0 mm

Maybe a third person’s measurements will yield a good real-world average?
The ideal specs are surely also published somewhere =]

1 Like