Note: The following instructions are cut/pasted from a FW support email to me when they were helping me with something.
Instructions for Framework 16 main board reset:
Please try the following steps and see if it helps.
A. Set the BIOS to default by tapping F2 or F12 during the boot-up, once in the BIOS, please press F9 and F10.
B. If the issue persists, please reset the mainboard using the guide below.
-
Please turn off the laptop and unplug the charger.
-
Remove the input module, touchpad module, spacers, and Mid Plate, then plug in the charger.
-
Slowly press the chassis open switch/case switch 10 times, holding each press for 2 seconds. Release, wait for the red blink on the mainboard LED, then repeat this step.
Please see the location of the chassis open switch for reference.
- Press the power button to boot the system.