Yay mine arrived!
14 Likes
Kick me while I’m down why don’t ya 
4 Likes
apparently there is some issue with this specific drive and it is only supported starting with kernel 6.5.5(!) … the drive didn’t work in my other pc as well, at least not under linux… the fedora live usb i have has 6.5.2, and the pop-os one 6.5.4. apparently some old lts might have worked as well.
with an archlinux live usb with kernel 6.5.7 the drive shows up…
1 Like
I look forward to seeing your setup tomorrow!
Install went smoothly for me hardware wise. I figured I would see if Ubuntu would take to the new processor and so far its working without a reinstall. I followed the ubuntu kernal update instructions and for the most part things are working. I had to restart a couple times to get wifi to connect and It seems firefox causes the system to stutter for reasons unknown but pretty much everything else just works!
2 Likes
fedora nightly installation worked. started digging into thunderbolt, but so far the first dock tried (asus simpro 2) only works partially, with not display output… two more to go, or the hunt for a suitable “usb-c” dock begins anew…
Yeah, that Lexar drive uses a Maxio MAP1602 controller that Linux has problems with. There is a patch submitted in September that would make it work if you have a new enough kernel version (or apply the patch yourself in a custom kernel): [PATCH v2] nvme-pci: add NVME_QUIRK_DELAY_BEFORE_CHK_RDY for MAXIO MAP1602 - Felix Yan
apparently my Fedex package arrived in Winnipeg 30 minutes ago, and it’s a 2.5 hour flight from there to here, and they say it’ll arrive before an hour and a half from now, not too confident mine’s getting delivered on time even though Fedex still says it’s on time lmao
Edit: Apparently Fedex closes at 8pm, so it’s still reasonable to come today, I just got confused because they said “Before 5pm”, but that was just the estimate not the closing time
1 Like
Anyone else still chilling in Anchorage on a clearance delay?
4 Likes
Yes, still chilling in Anchorage as well…
6 Likes
3 Likes
right here
3 Likes
I’ll be sure to post!
Sounds good that you upgraded without a hitch
1 Like
Yup, sounds like there’s a bunch. Life would be boring if it went smoothly. >_<
1 Like
Thank you! Didn’t see that thread. I figured it would be a few days, but since FedEx delivers on weekends it would be resolved by today. Though I suppose we’re at the mercy of CBP who probably only operates M-F.
1 Like
For everyone who has gotten their AMD Framework, please answer this poll. There have been some users with RAM issues and I thought it might be good to do a community poll to see if there are any trends.
Processor
- Ryzen 5
- Ryzen 7
0 voters
Are you having RAM issues?
- Yes
- No
0 voters
If you’re having no RAM issues, what brand and speed are you using?
- Crucial
- G Skill
- Kingston
- 4800 mhz
- 5200 mhz
- 5600 mhz
0 voters
If you’re having RAM issues, what brand and speed are you using?
- Crucial
- G Skill
- Kingston
- 4800 mhz
- 5200 mhz
- 5600 mhz
0 voters
1 Like
LoL…that went over my head. Thanks for clarifying.
3 Likes
I have a 1135g7 framework which I just today upgraded the mainboard to the ryzen 5. The RAM I installed is a ddr5 sodimm kingston 5200mhz (supposedly JEDEC Amazon.co.uk) 16GBx2 kit (not on the official supported list but other kits that weren’t are working for other users). white led on the power button comes on but then a blank screen and the following error seq happens on the debug LED: one white blink, then 12 green blinks(so looks good on that part) then orange followed by bbggbggg, Also system doesn’t move past this stage at all (tried twice for over 15 minutes each) so I doubt it’s memory training taking that long . I am normally able to diagnose problems but I cant seem to find any information on what the “bbggbggg” flashes mean they’re not mentioned here My Framework Laptop (Intel 11th Gen Intel® Core™) is not powering on . If anyone has any ideas or has a problem with 5200 or kingston ram it would be much appreciated. In the meantime I have ordered a crucial 32GB 5600 kit that seems to work for others( an extra £50 sadly) incase it is the kingston kit not being compatible. Also tried reconnecting the battery and reconnecting all the other parts too with no difference. Sucks because i was going to post lots of test results today.
Check out this thread, you might find more help there.
There are a few people in the same boat as you it sounds like.
1 Like